Shinko JC Limit Series

• JCS-33A: 48 x 48 x 96.5mm
• JCD-33A: 96 x 96 x 98.5mm
• Fully Featured – Low Cost
• 4 Digit Display 100-240VAC
• Alarm one point (relay output) is provided as standard
• Standard Duct-proof/Drip-proof structure(IP66)

Features

• JC Limit Series
• JC Limit Manual (JCD-33A)
• JC Limit Manual (JCS-33A)

Limit Control (Latching Relay)
1 set point, high-low limit control, type & latching limit action.

Multi-input
Accepts thermocouple (10 types), RTD (2 types), DC current (2 types) and DC voltage
(4 types). As the input sampling period is very short (0.25 seconds), multi-input function
enables the controllers to deal with a broader range of processes.

Alarm one point (relay output) is provided as standard
Alarm action is provided as standard for JC series. Alarm action and Energized De-energized can
easily be selected by key. (Default: No alarm action, Energized)

External Reset Input
– The external reset input (SM) is an option on the JCS-33A Limit
– Standard supply option on JCD33A Limit

Safety standard
UVCSA and CE marking

More communication functions
Shinko protocol and Modbus protocol are provided as standard for serial communication (Option: C5) (
For Modbus protocol, RTU mode or ASCII mode can be selected by key Operation.) It is possible to connect Modbus
based instruments without using a communication converter. When using our programmable controller with option
SVTC as a program setter and the JCO-33A with option C5, JCO-33 can be used as a multipoint programmable controller.
(Set value digital transmission is enabled, and a maximum of 31 units of JCO-33A can be connected.)

Dust-proof, Drip-proof structure (Provided as standard)
The controllers can be used even in harsh environments exposed to water and dust. (IP66)

Warranty – 3 year manufacturers warranty